Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

TPS73601MDBVREP IC REG LIN POS ADJ 400MA SOT23-5 Texas Instruments	7,495 In Stock	1 : ¥52.30000 Cut Tape (CT) 3,000 : ¥27.16742 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	5.5V	1.2V	5.5V	0.2V @ 400mA	400mA	550 µA	1 mA	58dB ~ 37dB (100Hz ~ 10kHz)	Enable	Over Current, Over Temperature, Reverse Polarity	-55°C ~ 125°C	Surface Mount	SC-74A, SOT-753	SOT-23-5
TPS70345PWP IC REG LINEAR 3.3V/1.2V 24HTSSOP Texas Instruments	1,123 In Stock	1 : ¥63.42000 Tube	-	Tube	Active	Positive	Fixed	2	6V	3.3V, 1.2V	-	0.26V @ 1A, -	1A, 2A	250 µA	-	-	Enable, Power Good, Reset, Sequencing	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	24-PowerTSSOP (0.173", 4.40mm Width)	24-HTSSOP
TPS72516DCQ IC REG LINEAR 1.6V 1A SOT223-6 Texas Instruments	0 In Stock 10,519 Marketplace	312 : ¥29.63686 Tube	-	Bulk Tube	Obsolete	Positive	Fixed	1	6V	1.6V	-	0.32V @ 1A	1A	225 µA	325 µA	60dB (1kHz)	Enable, Reset	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	SOT-223-6	SOT-223-6

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.