Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

AZ1117D-3.3TRE1 IC REG LINEAR 3.3V 1A TO252-2 Diodes Incorporated	2,269 In Stock 95,000 Factory	1 : ¥3.40000 Cut Tape (CT) 2,500 : ¥1.20843 Tape & Reel (TR)	AZ1117	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.25V @ 1A	1A	10 mA	-	75dB (120Hz)	-	Thermal Shutdown	-40°C ~ 125°C (TJ)	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	TO-252-3
SPX3819M5-L/TR IC REG LIN POS ADJ 500MA SOT23-5 MaxLinear, Inc.	4,005 In Stock	1 : ¥4.85000 Cut Tape (CT) 3,000 : ¥1.86749 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	16V	1.235V	15.3V	0.7V @ 500mA	500mA	8 µA	30 mA	-	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	SC-74A, SOT-753	SOT-23-5
LM1117IDT-5.0/NOPB IC REG LINEAR 5V 800MA TO252-3 Texas Instruments	484 In Stock	1 : ¥14.86000 Tube	-	Tube	Active	Positive	Fixed	1	15V	5V	-	1.2V @ 800mA	800mA	5 mA	10 mA	75dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	TO-252-3

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.