Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

MC78M05ABDTRKG IC REG LINEAR 5V 500MA DPAK onsemi	11,018 In Stock	1 : ¥5.01000 Cut Tape (CT) 2,500 : ¥1.66042 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	35V	5V	-	-	500mA	-	-	80dB (120Hz)	-	Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	DPAK
ADP123AUJZ-R7 IC REG LIN POS ADJ 300MA TSOT23 Analog Devices Inc.	54,832 In Stock	1 : ¥13.35000 Cut Tape (CT) 3,000 : ¥5.64974 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	5.5V	0.8V	5V	0.15V @ 300mA	300mA	105 µA	240 µA	60dB (10kHz ~ 100kHz)	Enable	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	SOT-23-5 Thin, TSOT-23-5	TSOT-23-5
ADM7171ACPZ-5.0-R7 IC REG LINEAR 5V 1A 8LFCSP Analog Devices Inc.	3,370 In Stock	1 : ¥36.90000 Cut Tape (CT) 1,500 : ¥19.47357 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6.5V	5V	-	-	1A	2 mA	6.3 mA	-	Enable, Soft Start	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	8-WFDFN Exposed Pad, CSP	8-LFCSP-WD (3x3)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.