Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

TLV1117LV33DCYR IC REG LINEAR 3.3V 1A SOT223-4 Texas Instruments	13,878 In Stock	1 : ¥2.87000 Cut Tape (CT) 2,500 : ¥0.82092 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	1.3V @ 800mA	1A	100 µA	-	75dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-4
LP38690DTX-3.3/NOPB IC REG LINEAR 3.3V 1A TO252-3 Texas Instruments	8,284 In Stock	1 : ¥16.41000 Cut Tape (CT) 2,500 : ¥7.52283 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	10V	3.3V	-	1V @ 1A	1A	55 µA	100 µA	55dB (120Hz)	-	Over Temperature	-40°C ~ 125°C	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	TO-252-3
MIC5317-3.3YD5-TR IC REG LIN 3.3V 150MA TSOT23-5 Microchip Technology	1,902 In Stock	1 : ¥2.13000 Cut Tape (CT) 3,000 : ¥1.64196 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	3.3V	-	0.31V @ 150mA	150mA	39 µA	-	80dB ~ 65dB (1kHz ~ 10kHz)	Enable	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	SOT-23-5 Thin, TSOT-23-5	TSOT-23-5

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.