Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

TPS7A4701RGWR IC REG LINEAR POS ADJ 1A 20VQFN Texas Instruments	2,848 In Stock	1 : ¥44.66000 Cut Tape (CT) 3,000 : ¥23.21623 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	35V	1.4V	34V	0.45V @ 1A	1A	1 mA	6.1 mA	78dB (1kHz)	Enable	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	20-VQFN Exposed Pad	20-VQFN (5x5)
TPS7A3301RGWR IC REG LIN NEG ADJ 1A 20VQFN Texas Instruments	5,393 In Stock	1 : ¥53.39000 Cut Tape (CT) 3,000 : ¥29.17773 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Negative	Adjustable	1	-36V	-1.18V	-33V	0.8V @ 1A	1A	100 µA	950 µA	72dB (10kHz)	Enable, Soft Start	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	20-VQFN Exposed Pad	20-VQFN (5x5)
LT1965EMS8E-2.5#PBF IC REG LINEAR 2.5V 1.1A 8MSOP Analog Devices Inc.	0 In Stock Check Lead Time	1 : ¥53.47000 Tube	-	Tube	Active	Positive	Fixed	1	20V	2.5V	-	0.49V @ 1.1A	1.1A	1.1 mA	40 mA	75dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad	8-MSOP-EP

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.