Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 2
Manufacturer
Analog Devices Inc.Texas Instruments
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)Tube
Output Type
AdjustableFixed
Voltage - Input (Max)
3.5V, 5.5V35V
Voltage - Output (Min/Fixed)
0.4V5V
Voltage - Output (Max)
2.6V-
Voltage Dropout (Max)
0.25V @ 1.5A2V @ 1A
PSRR
80dB (120Hz)-
Control Features
-Enable, Power Good
Protection Features
Over Current, Over Temperature, Reverse Polarity, Short CircuitOver Current, Over Temperature, Short Circuit
Operating Temperature
-40°C ~ 125°C0°C ~ 125°C
Mounting Type
Surface MountThrough Hole
Package / Case
10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed PadTO-220-3
Supplier Device Package
10-MSOP-EPTO-220-3
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Output Configuration
Output Type
Number of Regulators
Voltage - Input (Max)
Voltage - Output (Min/Fixed)
Voltage - Output (Max)
Voltage Dropout (Max)
Current - Output
Current - Quiescent (Iq)
PSRR
Control Features
Protection Features
Operating Temperature
Mounting Type
Package / Case
Supplier Device Package
TO-220-3
LM7805CT/NOPB
IC REG LINEAR 5V 1A TO220-3
Texas Instruments
2,084
In Stock
1 : ¥15.90000
Tube
-
Tube
Active
Positive
Fixed
1
35V
5V
-
2V @ 1A
1.5A
6 mA
80dB (120Hz)
-
Over Current, Over Temperature, Short Circuit
0°C ~ 125°C
Through Hole
TO-220-3
TO-220-3
10 MSOP EP
LTC3026EMSE#TRPBF
IC REG LIN POS ADJ 1.5A 10MSOP
Analog Devices Inc.
4,240
In Stock
1 : ¥54.32000
Cut Tape (CT)
2,500 : ¥29.69118
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Positive
Adjustable
1
3.5V, 5.5V
0.4V
2.6V
0.25V @ 1.5A
1.5A
-
-
Enable, Power Good
Over Current, Over Temperature, Reverse Polarity, Short Circuit
-40°C ~ 125°C
Surface Mount
10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad
10-MSOP-EP
Showing
of 2

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.