Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LP5907MFX-3.3/NOPB IC REG LINEAR 3.3V 250MA SOT23-5 Texas Instruments	14,354 In Stock	1 : ¥5.10000 Cut Tape (CT) 3,000 : ¥1.79894 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.25V @ 250mA	250mA	25 µA	425 µA	90dB ~ 60dB (100Hz ~ 100kHz)	Enable	Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	SC-74A, SOT-753	SOT-23-5
ADM7171ACPZ-3.3-R7 IC REG LINEAR 3.3V 1A 8LFCSP Analog Devices Inc.	5,143 In Stock	1 : ¥36.90000 Cut Tape (CT) 1,500 : ¥19.47357 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6.5V	3.3V	-	-	1A	2 mA	6.3 mA	-	Enable, Soft Start	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	8-WFDFN Exposed Pad, CSP	8-LFCSP-WD (3x3)
TPS70633DRVT IC REG LINEAR 3.3V 150MA 6WSON Texas Instruments	416 In Stock	1 : ¥11.41000 Cut Tape (CT) 250 : ¥7.43416 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6.5V	3.3V	-	1.54V @ 150mA	150mA	2.55 µA	350 µA	80dB ~ 52dB (10Hz ~ 1kHz)	Enable	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	6-WDFN Exposed Pad	6-WSON (2x2)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.