Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 4

Filters

Stacked

Scrolling

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT1129IS8-3.3#PBF IC REG LINEAR 3.3V 700MA 8SOIC Analog Devices Inc.	152 In Stock	1 : ¥90.70000 Tube	-	Tube	Active	Positive	Fixed	1	30V	3.3V	-	0.7V @ 700mA	700mA	70 µA	90 mA	64dB (120Hz)	Enable	Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	8-SOIC (0.154", 3.90mm Width)	8-SO
LP2951ACMM-3.0/NOPB IC REG LIN POS ADJ 100MA 8VSSOP Texas Instruments	5,627 In Stock	1 : ¥12.84000 Cut Tape (CT) 1,000 : ¥5.83412 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable (Fixed)	1	30V	1.235V (3V)	29V	0.6V @ 100mA	100mA	120 µA	14 mA	-	Enable	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C (TJ)	Surface Mount	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)	8-VSSOP
AP2112R5A-3.3TRG1 IC REG LINEAR 3.3V 600MA SOT89-5 Diodes Incorporated	912 In Stock 21,000 Factory	1 : ¥5.10000 Cut Tape (CT) 1,000 : ¥1.98647 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	3.3V	-	0.4V @ 600mA	600mA	80 µA	-	65sB (100Hz ~ 1KHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	SOT-89-5/6	SOT-89-5
S-817A33ANB-CUWT1U IC REG LINEAR 3.3V 50MA SC82AB ABLIC Inc.	0 In Stock Check Lead Time	1 : ¥8.33000 Cut Tape (CT) 3,000 : ¥3.54595 Tape & Reel (TR)	S-817	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	10V	3.3V	-	0.41V @ 10mA	50mA	2.5 µA	-	-	-	Short Circuit	-40°C ~ 85°C (TA)	Surface Mount	SC-82A, SOT-343	SC-82AB

Showing

of 4

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.