Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

ADP122AUJZ-3.3-R7 IC REG LINEAR 3.3V 300MA TSOT5 Analog Devices Inc.	56,310 In Stock	1 : ¥13.35000 Cut Tape (CT) 3,000 : ¥5.64974 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.15V @ 300mA	300mA	105 µA	240 µA	60dB (10kHz ~ 100kHz)	Enable	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	SOT-23-5 Thin, TSOT-23-5	TSOT-23-5
TLV76750DRVR IC REG LINEAR 5V 1A 6WSON Texas Instruments	32,416 In Stock	1 : ¥5.27000 Cut Tape (CT) 3,000 : ¥2.79477 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	16V	5V	-	0.9V @ 1A	1A	80 µA	1.5 mA	70dB (120Hz)	Enable	Over Current, Over Temperature, UVLO	-40°C ~ 125°C (TJ)	Surface Mount	6-WDFN Exposed Pad	6-WSON (2x2)
TPS78230DRVR IC REG LINEAR 3V 150MA 6WSON Texas Instruments	15,538 In Stock	1 : ¥7.39000 Cut Tape (CT) 3,000 : ¥2.96299 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3V	-	0.25V @ 150mA	150mA	1.3 µA	8 µA	40dB ~ 15dB (10Hz ~ 1kHz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	6-WDFN Exposed Pad	6-WSON (2x2)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.