Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

NCP186AMX330TAG IC REG LINEAR 3.3V 1A 8XDFN onsemi	65,387 In Stock	1 : ¥4.08000 Cut Tape (CT) 5,000 : ¥1.26809 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.145V @ 1A	1A	140 µA	75dB (1kHz)	Enable	Over Current, Over Temperature, Soft Start	-40°C ~ 125°C	Surface Mount	8-XFDFN Exposed Pad	8-XDFN (1.6x1.2)
AP7366-33W5-7 IC REG LINEAR 3.3V 600MA SOT25 Diodes Incorporated	25,070 In Stock	1 : ¥4.08000 Cut Tape (CT) 3,000 : ¥0.76590 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	3.3V	-	0.32V @ 600mA	600mA	80 µA	75dB ~ 55dB (1kHz ~ 10kHz)	Current Limit, Enable	Over Current, Short Circuit	-40°C ~ 85°C (TA)	Surface Mount	SC-74A, SOT-753	SOT-25
MC79M05CDTRKG IC REG LINEAR -5V 500MA DPAK onsemi	0 In Stock Check Lead Time	1 : ¥4.76000 Cut Tape (CT) 2,500 : ¥1.70823 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Negative	Fixed	1	-35V	-5V	-	1.1V @ 500mA (Typ)	500mA	-	66dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	DPAK

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.