Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

ADM7171ACPZ-R7 IC REG LIN POS ADJ 1A 8LFCSP Analog Devices Inc.	2,460 In Stock	1 : ¥36.90000 Cut Tape (CT) 1,500 : ¥19.47357 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	6.5V	1.2V	6.365V	0.135V @ 1A	1A	2 mA	6.3 mA	60db ~ 20dB (100kHz ~ 1MHz)	Enable, Soft Start	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	8-WFDFN Exposed Pad, CSP	8-LFCSP-WD (3x3)
TC1264-2.5VDBTR IC REG LIN 2.5V 800MA SOT223-3 Microchip Technology	3,810 In Stock	1 : ¥8.33000 Cut Tape (CT) 4,000 : ¥6.69471 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	2.5V	-	1.4V @ 800mA	800mA	130 µA	-	64dB (1kHz)	-	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-3
MIC5302-3.3YMT-TR IC REG LINEAR 3.3V 150MA 4TMLF Microchip Technology	958 In Stock	1 : ¥5.36000 Cut Tape (CT) 5,000 : ¥4.08060 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.1V @ 150mA	150mA	120 µA	-	65dB ~ 42dB (1kHz ~ 20kHz)	Enable	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	4-UFDFN Exposed Pad, 4-TMLF®	4-TMLF® (1.2x1.6)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.