Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

TLV75533PDBVR IC REG LINEAR 3.3V 500MA SOT23-5 Texas Instruments	25,426 In Stock	1 : ¥3.40000 Cut Tape (CT) 3,000 : ¥1.19771 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.238V @ 500mA	500mA	31 µA	-	52dB (1kHz ~ 1MHz)	Enable	Over Current, Over Temperature	-40°C ~ 125°C (TJ)	Surface Mount	SC-74A, SOT-753	SOT-23-5
TLV76733DRVR IC REG LINEAR 3.3V 1A 6WSON Texas Instruments	18,079 In Stock	1 : ¥4.93000 Cut Tape (CT) 3,000 : ¥1.90240 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	16V	3.3V	-	1.4V @ 1A	1A	80 µA	1.5 mA	70dB (120Hz)	Enable	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Surface Mount	6-WDFN Exposed Pad	6-WSON (2x2)
TLV70018DDCR IC REG LINEAR 1.8V 200MA SOT23-5 Texas Instruments	9,029 In Stock	1 : ¥4.08000 Cut Tape (CT) 3,000 : ¥0.75555 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	1.8V	-	0.25V @ 200mA	200mA	55 µA	270 µA	68dB (1kHz)	Enable	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Surface Mount	SOT-23-5 Thin, TSOT-23-5	SOT-23-THIN

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.