Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

ADM7155ACPZ-04-R7 IC REG LIN POS ADJ 600MA 8LFCSP Analog Devices Inc.	2,152 In Stock	1 : ¥59.25000 Cut Tape (CT) 1,500 : ¥33.61506 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	5.5V	1.2V	3.4V	0.21V @ 600mA	600mA	7 mA	10 mA	94dB ~ 57dB (1kHz ~ 1MHz)	Enable	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	8-WFDFN Exposed Pad, CSP	8-LFCSP-WD (3x3)
LT3045EDD#TRPBF IC REG LIN POS PROG 500MA 10DFN Analog Devices Inc.	5,909 In Stock	1 : ¥68.86000 Cut Tape (CT) 2,500 : ¥37.61625 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	20V	0V	15V	0.45V @ 500mA	500mA	20 µA	25 mA	117dB ~ 53dB (120Hz ~ 10MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Surface Mount	10-WFDFN Exposed Pad	10-DFN (3x3)
ADM7150ACPZ-3.3-R7 IC REG LINEAR 3.3V 800MA 8LFCSP Analog Devices Inc.	2,585 In Stock	1 : ¥88.83000 Cut Tape (CT) 1,500 : ¥50.37328 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	16V	3.3V	-	-	800mA	7 mA	12 mA	94dB ~ 62dB (1kHz ~ 1MHz)	Enable	Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	8-WFDFN Exposed Pad, CSP	8-LFCSP-WD (3x3)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.