Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

ADP7104ACPZ-R7 IC REG LIN POS ADJ 500MA 8LFCSP Analog Devices Inc.	1,390 In Stock	1 : ¥42.76000 Cut Tape (CT) 1,500 : ¥22.59794 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	20V	1.22V	19.45V	0.55V @ 500mA	500mA	900 µA	1.6 mA	80dB ~ 50dB (10kHz ~ 100kHz)	Enable, Power Good, Under Voltage Lockout	Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	8-WFDFN Exposed Pad, CSP	8-LFCSP-WD (3x3)
LT3088MPM#PBF IC REG LIN POS ADJ 800MA 3DDPAK Analog Devices Inc.	60 In Stock	1 : ¥127.26000 Tube	-	Tube	Active	Positive	Adjustable	1	36V	0V	34.5V	1.6V @ 800mA	800mA	50.5 µA	2 mA	90dB ~ 20dB (120Hz ~ 1MHz)	-	Over Current, Over Temperature, Reverse Polarity, Short Circuit	-55°C ~ 150°C	Surface Mount	TO-263-4, D2PAK (3 Leads + Tab), TO-263AA	DDPAK-3
LT3045EDD#TRPBF IC REG LIN POS PROG 500MA 10DFN Analog Devices Inc.	0 In Stock Check Lead Time	1 : ¥83.65000 Cut Tape (CT) 2,500 : ¥35.80976 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	20V	0V	15V	0.45V @ 500mA	500mA	20 µA	25 mA	117dB ~ 53dB (120Hz ~ 10MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Surface Mount	10-WFDFN Exposed Pad	10-DFN (3x3)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.