Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT3094HDD#PBF IC REG LIN NEG ADJ 500MA 12DFN Analog Devices Inc.	129 In Stock	1 : ¥85.05000 Tube	-	Tube	Active	Negative	Adjustable	1	-2.3V	-19.5V	0V	0.41V @ 500mA	500mA	2.35 mA	23 mA	108dB ~ 28dB (120Hz ~ 10MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 150°C (TJ)	Surface Mount	12-WFDFN Exposed Pad	12-DFN (3x3)
AP2127K-ADJTRG1 IC REG LIN POS ADJ 300MA SOT23-5 Diodes Incorporated	49,496 In Stock 894,000 Factory	1 : ¥3.23000 Cut Tape (CT) 3,000 : ¥0.72175 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	6V	0.8V	5.5V	0.3V @ 300mA	300mA	90 µA	-	68dB ~ 45db (100Hz ~ 10kHz)	-	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	SC-74A, SOT-753	SOT-23-5
TLV76050DBZR IC REG LINEAR 5V 100MA SOT23-3 Texas Instruments	24,789 In Stock	1 : ¥3.37000 Cut Tape (CT) 3,000 : ¥0.74627 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	30V	5V	-	1.1V @ 100mA	100mA	5 mA	-	-	-	Over Temperature	-40°C ~ 125°C (TJ)	Surface Mount	TO-236-3, SC-59, SOT-23-3	SOT-23-3

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.