Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

MCP1825S-3302E/DB IC REG LIN 3.3V 500MA SOT223-3 Microchip Technology	4,576 In Stock	1 : ¥5.66000 Tube	-	Tube	Active	Positive	Fixed	1	6V	3.3V	-	0.35V @ 500mA	500mA	220 µA	-	60dB (100Hz)	-	Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	-	-	Surface Mount	TO-261-4, TO-261AA	SOT-223-3
MCP1792T-5002H/CB IC REG LINEAR 5V 100MA SOT23A-3 Microchip Technology	21,103 In Stock	1 : ¥6.72000 Cut Tape (CT) 3,000 : ¥5.10073 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	55V	5V	-	1.2V @ 100mA	100mA	45 µA	150 µA	80dB ~ 55dB (100Hz ~ 100kHz)	Enable	Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 150°C (TA)	Automotive	AEC-Q100	Surface Mount	TO-236-3, SC-59, SOT-23-3	SOT-23A-3
NCV4264-2ST50T3G IC REG LINEAR 5V 100MA SOT223 onsemi	51,528 In Stock	1 : ¥12.81000 Cut Tape (CT) 4,000 : ¥5.15350 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Not For New Designs	Positive	Fixed	1	45V	5V	-	0.5V @ 100mA	100mA	55 µA	70 µA	67dB (100Hz)	-	Over Current, Over Temperature, Reverse Polarity, Short Circuit	-40°C ~ 150°C	Automotive	AEC-Q100	Surface Mount	TO-261-4, TO-261AA	SOT-223 (TO-261)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.