Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 4

Filters

Stacked

Scrolling

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

AP7340-33FS4-7 IC REG LINEAR 3.3V 150MA 4DFN Diodes Incorporated	30,340 In Stock 825,000 Factory	1 : ¥3.04000 Cut Tape (CT) 5,000 : ¥0.80970 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.25V	3.3V	-	0.27V @ 150mA	150mA	50 µA	100 µA	75dB (1kHz)	Enable	Over Current	-40°C ~ 85°C	Surface Mount	4-XDFN Exposed Pad	X2-DFN1010-4
NCP167AFCT180T2G IC REG LINEAR 1.8V 700MA 4WLCSP onsemi	13,960 In Stock 340,000 Factory	1 : ¥3.57000 Cut Tape (CT) 10,000 : ¥1.04299 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	1.8V	-	0.45V @ 700mA	700mA	18 µA	-	83dB ~ 63dB (100Hz ~ 100kHz)	Enable	Over Current, Over Temperature	-40°C ~ 125°C (TJ)	Surface Mount	4-XFBGA, WLCSP	4-WLCSP (0.64x0.64)
RT9073A-28GQZ IC REG LINEAR 2.8V 250MA 4ZQFN Richtek USA Inc.	236 In Stock	1 : ¥9.61000 Cut Tape (CT) 2,500 : ¥0.99172 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	2.8V	-	0.6V @ 250mA	250mA	3 µA	-	75dB (1kHz)	Enable	Over Current, Over Temperature	-40°C ~ 85°C (TA)	Surface Mount	4-XDFN Exposed Pad	4-ZQFN (1x1)
MC78M05CDTRKG IC REG LINEAR 5V 500MA DPAK onsemi	0 In Stock Check Lead Time	1 : ¥4.76000 Cut Tape (CT) 2,500 : ¥1.56249 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	35V	5V	-	-	500mA	-	-	80dB (120Hz)	-	Over Temperature, Short Circuit	0°C ~ 125°C	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	DPAK

Showing

of 4

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.