Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 4

Filters

Stacked

Scrolling

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT3065MPMSE#PBF IC REG LIN POS ADJ 500MA 12MSOP Analog Devices Inc.	763 In Stock	1 : ¥108.39000 Tube	-	Tube	Active	Positive	Adjustable	1	45V	0.6V	40V	0.51V @ 500mA	500mA	110 µA	25 mA	85dB (120Hz)	Current Limit, Enable, Power Good, Soft Start	Over Current, Over Temperature, Reverse Polarity	-55°C ~ 150°C	Surface Mount	12-TSSOP (0.118", 3.00mm Width) Exposed Pad	12-MSOP-EP
LT3045MPDD#PBF IC REG LIN POS PROG 500MA 10DFN Analog Devices Inc.	123 In Stock	1 : ¥160.50000 Tube	-	Tube	Active	Positive	Adjustable	1	20V	0V	15V	0.45V @ 500mA	500mA	-	25 mA	117dB ~ 53dB (120Hz ~ 10MHz)	Enable, Power Good	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-55°C ~ 125°C (TJ)	Surface Mount	10-WFDFN Exposed Pad	10-DFN (3x3)
LT3080IST#WPBF IC REG LIN POS ADJ 1.1A SOT223-3 Analog Devices Inc.	800 In Stock	1 : ¥55.42000 Tube	-	Tube	Active	Positive	Adjustable	1	36V	0V	36V	1.6V @ 1.1A	1.1A	500 µA	30 mA	75dB ~ 20dB (120Hz ~ 1MHz)	-	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C (TJ)	Surface Mount	TO-261-4, TO-261AA	SOT-223-3
LT3008MPTS8-5#TRPBF IC REG LINEAR 5V 20MA TSOT23-8 Analog Devices Inc.	1,869 In Stock	1 : ¥88.83000 Cut Tape (CT) 2,500 : ¥50.22944 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	45V	5V	-	0.5V @ 20mA	20mA	6 µA	1.2 mA	54dB (120Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-55°C ~ 125°C	Surface Mount	SOT-23-8 Thin, TSOT-23-8	TSOT-23-8

Showing

of 4

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.