Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 4

Filters

Stacked

Scrolling

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LD1117S33CTR IC REG LINEAR 3.3V 800MA SOT223 STMicroelectronics	56,114 In Stock	1 : ¥3.49000 Cut Tape (CT) 2,500 : ¥1.23104 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.3V @ 800mA	800mA	10 mA	-	75dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223
AP2127K-1.8TRG1 IC REG LINEAR 1.8V 300MA SOT23-5 Diodes Incorporated	257,483 In Stock	1 : ¥2.21000 Cut Tape (CT) 3,000 : ¥0.49324 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	1.8V	-	0.7V @ 300mA	300mA	90 µA	-	68dB ~ 54dB (100Hz ~ 10kHz)	-	Over Current, Over Temperature	-40°C ~ 85°C	Surface Mount	SC-74A, SOT-753	SOT-23-5
AZ1084CD-3.3TRG1 IC REG LINEAR 3.3V 5A TO252-2 Diodes Incorporated	1,733 In Stock 32,500 Factory	1 : ¥5.02000 Cut Tape (CT) 2,500 : ¥1.77138 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	12V	3.3V	-	1.5V @ 4.5A	5A	10 mA	-	72dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	TO-252-3
LP38692MP-5.0/NOPB IC REG LINEAR 5V 1A SOT223-5 Texas Instruments	4,192 In Stock	1 : ¥17.17000 Cut Tape (CT) 1,000 : ¥8.42870 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	10V	5V	-	0.8V @ 1A	1A	55 µA	100 µA	55dB (120Hz)	-	Over Temperature	-40°C ~ 125°C	Surface Mount	TO-261-5, TO-261AB	SOT-223-5

Showing

of 4

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.