Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 4

Filters

Stacked

Scrolling

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

L7805CV IC REG LINEAR 5V 1.5A TO220AB STMicroelectronics	40,904 In Stock	1 : ¥4.93000 Tube	-	Tube	Active	Positive	Fixed	1	35V	5V	-	2V @ 1A (Typ)	1.5A	8 mA	-	62dB (120Hz)	-	Over Temperature, Short Circuit	0°C ~ 125°C	-	-	Through Hole	TO-220-3	TO-220
LM1117IMPX-3.3/NOPB IC REG LIN 3.3V 800MA SOT223-4 Texas Instruments	24,930 In Stock	1 : ¥9.69000 Cut Tape (CT) 2,000 : ¥4.09908 Tape & Reel (TR)	LM1117-3.3	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.2V @ 800mA	800mA	5 mA	10 mA	75dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	-	-	Surface Mount	TO-261-4, TO-261AA	SOT-223-4
NCV4274AST33T3G IC REG LINEAR 3.3V 400MA SOT223 onsemi	2,152 In Stock	1 : ¥12.67000 Cut Tape (CT) 4,000 : ¥5.58105 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	40V	3.3V	-	1.27V @ 250mA	400mA	250 µA	45 mA	60dB (100Hz)	-	Over Temperature, Reverse Polarity, Short Circuit	-40°C ~ 150°C (TJ)	Automotive	AEC-Q100	Surface Mount	TO-261-4, TO-261AA	SOT-223 (TO-261)
LM1117T-3.3/NOPB IC REG LINEAR 3.3V 800MA TO220-3 Texas Instruments	2,657 In Stock	1 : ¥14.37000 Tube	LM1117-3.3	Tube	Active	Positive	Fixed	1	15V	3.3V	-	1.2V @ 800mA	800mA	5 mA	10 mA	75dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	-	-	Through Hole	TO-220-3	TO-220-3

Showing

of 4

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.