Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

NCV1117DT33T5G IC REG LINEAR 3.3V 1A DPAK onsemi	5,140 In Stock	1 : ¥6.04000 Cut Tape (CT) 2,500 : ¥2.15948 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	20V	3.3V	-	1.2V @ 800mA	1A	10 mA	64dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C (TA)	Automotive	AEC-Q100	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	DPAK
MIC29302WU-TR IC REG LINEAR POS ADJ 3A TO263-5 Microchip Technology	9,616 In Stock	1 : ¥23.73000 Cut Tape (CT) 750 : ¥17.89737 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	26V	1.25V	25V	0.6V @ 3A	3A	-	-	Enable	Over Current, Over Temperature, Reverse Polarity, Transient Voltage	-40°C ~ 125°C	-	-	Surface Mount	TO-263-6, D2PAK (5 Leads + Tab), TO-263BA	TO-263-5
LDCL015MR IC REG LIN POS ADJ 150MA SOT23-5 STMicroelectronics	48,765 In Stock	1 : ¥8.29000 Cut Tape (CT) 3,000 : ¥4.43329 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	5.5V	0.8V	5.4V	0.1V @ 100mA	150mA	160 µA	52dB ~ 51dB (1kHz ~ 10kHz)	Enable	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C	-	-	Surface Mount	SC-74A, SOT-753	SOT-23-5

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.