Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

MIC5205YM5-TR IC REG LIN POS ADJ 150MA SOT23-5 Microchip Technology	53,902 In Stock	1 : ¥4.43000 Cut Tape (CT) 3,000 : ¥3.36605 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	16V	1.242V	15.65V	0.35V @ 150mA	150mA	150 µA	2.5 mA	75dB (100Hz)	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	SC-74A, SOT-753	SOT-23-5
ISL80101IRAJZ-TK IC REG LINEAR POS ADJ 1A 10DFN Renesas Electronics Corporation	13,166 In Stock	1 : ¥16.42000 Cut Tape (CT) 1,000 : ¥8.05562 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	6V	0.8V	5V	0.212V @ 1A	1A	5 mA	7 mA	65dB ~ 58dB (120Hz ~ 1kHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	10-VFDFN Exposed Pad	10-DFN (3x3)
LT3094EDD#PBF IC REG LIN NEG ADJ 500MA 12DFN Analog Devices Inc.	1,409 In Stock	1 : ¥68.86000 Tube	-	Tube	Active	Negative	Adjustable	1	-2.3V	-19.5V	0V	0.41V @ 500mA	500mA	2.35 mA	23 mA	108dB ~ 28dB (120Hz ~ 10MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	12-WFDFN Exposed Pad	12-DFN (3x3)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.