Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LD1117S33CTR IC REG LINEAR 3.3V 800MA SOT223 STMicroelectronics	46,842 In Stock	1 : ¥3.49000 Cut Tape (CT) 2,500 : ¥1.23104 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.3V @ 800mA	800mA	10 mA	-	75dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223
ADM7170ACPZ-5.0-R7 IC REG LINEAR 5V 500MA 8LFCSP Analog Devices Inc.	3,970 In Stock	1 : ¥26.35000 Cut Tape (CT) 1,500 : ¥13.93039 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6.5V	5V	-	-	500mA	2 mA	5.1 mA	-	Enable, Soft Start	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	8-WFDFN Exposed Pad, CSP	8-LFCSP-WD (3x3)
ADP7142ACPZN-R7 IC REG LIN POS ADJ 200MA 6LFCSP Analog Devices Inc.	133 In Stock	1 : ¥30.94000 Cut Tape (CT) 3,000 : ¥15.53076 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	40V	1.2V	39.58V	0.42V @ 200mA	200mA	140 µA	320 µA	88dB ~ 50dB (10kHz ~ 1MHz)	Enable, Soft Start	Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	6-UDFN Exposed Pad, CSP	6-LFCSP-UD (2x2)

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.