Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

MIC5365-3.0YC5-TR IC REG LINEAR 3V 150MA SC70-5 Microchip Technology	172,607 In Stock	1 : ¥1.48000 Cut Tape (CT) 3,000 : ¥1.02015 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3V	-	0.31V @ 150mA	150mA	39 µA	-	80dB ~ 65dB (1kHz ~ 10kHz)	Enable	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	5-TSSOP, SC-70-5, SOT-353	SC-70-5
ADP123AUJZ-R7 IC REG LIN POS ADJ 300MA TSOT23 Analog Devices Inc.	55,169 In Stock	1 : ¥13.35000 Cut Tape (CT) 3,000 : ¥5.64974 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	5.5V	0.8V	5V	0.15V @ 300mA	300mA	105 µA	240 µA	60dB (10kHz ~ 100kHz)	Enable	Over Current, Over Temperature, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	SOT-23-5 Thin, TSOT-23-5	TSOT-23-5
L78L12ACUTR IC REG LINEAR 12V 100MA SOT89-3 STMicroelectronics	39,470 In Stock	1 : ¥5.25000 Cut Tape (CT) 2,500 : ¥2.03373 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	35V	12V	-	-	100mA	6 mA	6.5 mA	42dB (120Hz)	-	Over Current, Over Temperature, Short Circuit	0°C ~ 125°C	Surface Mount	TO-243AA	SOT-89-3

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.