Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

MCP1703T-3302E/CB IC REG LIN 3.3V 250MA SOT23A-3 Microchip Technology	21,646 In Stock	1 : ¥6.38000 Cut Tape (CT) 3,000 : ¥4.76050 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	16V	3.3V	-	0.725V @ 250mA	250mA	5 µA	-	44dB (100Hz)	-	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	TO-236-3, SC-59, SOT-23-3	SOT-23A-3
LM2941SX/NOPB IC REG LIN POS ADJ 1A DDPAK Texas Instruments	9,410 In Stock	1 : ¥15.13000 Cut Tape (CT) 500 : ¥8.97008 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	26V	5V	20V	1V @ 1A	1A	10 mA	15 mA	-	Enable	Over Temperature, Reverse Polarity, Short Circuit	-40°C ~ 125°C	Surface Mount	TO-263-6, D2PAK (5 Leads + Tab), TO-263BA	TO-263 (DDPAK-5)
MIC5233-3.0YM5-TR IC REG LINEAR 3V 100MA SOT23-5 Microchip Technology	20,008 In Stock	1 : ¥13.77000 Cut Tape (CT) 3,000 : ¥10.54103 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	36V	3V	-	0.45V @ 100mA	100mA	30 µA	2 mA	-	Enable	Over Current, Over Temperature, Reverse Polarity	-40°C ~ 125°C	Surface Mount	SC-74A, SOT-753	SOT-23-5

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.