Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

MIC5504-3.3YM5-TR IC REG LINEAR 3.3V 300MA SOT23-5 Microchip Technology	114,296 In Stock	1 : ¥1.31000 Cut Tape (CT) 3,000 : ¥0.90308 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	0.38V @ 300mA	300mA	55 µA	65 µA	60dB (1kHz)	Enable	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	SC-74A, SOT-753	SOT-23-5
LD1117S33TR IC REG LINEAR 3.3V 800MA SOT223 STMicroelectronics	35,343 In Stock	1 : ¥3.74000 Cut Tape (CT) 2,500 : ¥1.32422 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.2V @ 800mA	800mA	10 mA	-	75dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223
AZ1117CH-3.3TRG1 IC REG LINEAR 3.3V 1A SOT223 Diodes Incorporated	26,173 In Stock	1 : ¥3.83000 Cut Tape (CT) 4,000 : ¥0.71780 Tape & Reel (TR)	AZ1117C	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.3V @ 800mA	1A	6 mA	-	70dB (120Hz)	-	Thermal Shutdown	-20°C ~ 125°C (TJ)	Surface Mount	TO-261-4, TO-261AA	SOT-223-3

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.