Power Distribution Switches, Load Drivers

Results: 2
Manufacturer
Texas InstrumentsToshiba Semiconductor and Storage
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Output Type
N-ChannelP-Channel
Voltage - Load
0.75V ~ 3.6V1.1V ~ 5.5V
Current - Output (Max)
1A2A
Rds On (Typ)
18.3mOhm34mOhm
Supplier Device Package
4-WCSPD (0.79x0.79)6-DSBGA (1.39x.89)
Package / Case
4-UFBGA, WLCSP6-XFBGA, DSBGA
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Switch Type
Number of Outputs
Ratio - Input:Output
Output Configuration
Output Type
Interface
Voltage - Load
Voltage - Supply (Vcc/Vdd)
Current - Output (Max)
Rds On (Typ)
Input Type
Features
Fault Protection
Operating Temperature
Mounting Type
Supplier Device Package
Package / Case
4-XFBGA, CSPBGA
TCK107AG,LF
IC PWR SWITCH P-CHAN 1:1 4WCSPD
Toshiba Semiconductor and Storage
88,617
In Stock
1 : ¥5.36000
Cut Tape (CT)
5,000 : ¥1.13617
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
General Purpose
1
1:1
High Side
P-Channel
On/Off
1.1V ~ 5.5V
Not Required
1A
34mOhm
Non-Inverting
Load Discharge, Slew Rate Controlled
-
-40°C ~ 85°C (TA)
Surface Mount
4-WCSPD (0.79x0.79)
4-UFBGA, WLCSP
YZP-6-BGA Pkg
TPS22924CYZPR
IC PWR SWITCH N-CHAN 1:1 6DSBGA
Texas Instruments
11,217
In Stock
1 : ¥6.80000
Cut Tape (CT)
3,000 : ¥2.63019
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
General Purpose
1
1:1
High Side
N-Channel
On/Off
0.75V ~ 3.6V
Not Required
2A
18.3mOhm
Non-Inverting
Load Discharge, Slew Rate Controlled
-
-40°C ~ 85°C (TA)
Surface Mount
6-DSBGA (1.39x.89)
6-XFBGA, DSBGA
Showing
of 2

Power Distribution Switches, Load Drivers

Products in this family are solid-state devices used to connect or interrupt the flow of current to a supported load, under the direction of a logic-level control signal that is of itself incapable or unsuitable for supplying the load. They integrate the semiconductor switching device used to interrupt current flow and incorporate additional supporting components/functions such as over-voltage clamping, current limiting, and under-voltage lockouts, which differentiate them from similar IC and discrete components.