Buffers, Drivers, Receivers, Transceivers

Results: 5

Filters

Stacked

Scrolling

Showing

of 5

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Logic Type	Number of Elements	Number of Bits per Element	Input Type	Output Type	Current - Output High, Low	Voltage - Supply	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

SN74LVC1G07DCKR IC BUF NON-INVERT 5.5V SC70-5 Texas Instruments	51,699 In Stock	1 : ¥2.55000 Cut Tape (CT) 3,000 : ¥0.44533 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	-	Open Drain	-, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	5-TSSOP, SC-70-5, SOT-353	SC-70-5
74LVC1G17GV,125 IC BUFFER NON-INVERT 5.5V SC74A Nexperia USA Inc.	51,420 In Stock	1 : ¥2.98000 Cut Tape (CT) 3,000 : ¥0.52254 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	Schmitt Trigger	Push-Pull	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	SC-74A, SOT-753	SC-74A
74LVC1G17GW-Q100,1 IC BUF NON-INVERT 5.5V 5TSSOP Nexperia USA Inc.	21,412 In Stock	1 : ¥3.04000 Cut Tape (CT) 3,000 : ¥0.55550 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	Schmitt Trigger	Push-Pull	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	Automotive	AEC-Q100	Surface Mount	5-TSSOP, SC-70-5, SOT-353	5-TSSOP
74AUP1G125GW-Q100H IC BUF NON-INVERT 3.6V 5TSSOP Nexperia USA Inc.	3,700 In Stock	1 : ¥3.91000 Cut Tape (CT) 3,000 : ¥0.86063 Tape & Reel (TR)	74AUP	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	-	3-State	4mA, 4mA	0.8V ~ 3.6V	-40°C ~ 125°C (TA)	Automotive	AEC-Q100	Surface Mount	5-TSSOP, SC-70-5, SOT-353	5-TSSOP
74ALVC541D,118 IC BUFFER NON-INVERT 3.6V 20SO Nexperia USA Inc.	1,890 In Stock	1 : ¥7.14000 Cut Tape (CT) 2,000 : ¥2.32402 Tape & Reel (TR)	74ALVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	8	-	3-State	24mA, 24mA	1.65V ~ 3.6V	-40°C ~ 85°C (TA)	-	-	Surface Mount	20-SOIC (0.295", 7.50mm Width)	20-SO

Showing

of 5

Buffers, Drivers, Receivers, Transceivers

Logic buffers, drivers, receivers and transceivers allow isolated access to logic signals from one circuit for use in another circuit. Buffers pass their input signal, either unchanged or inverted, to their output and may be used to clean up a weak signal or drive a load. In a boolean logic simulator, a buffer is mainly used to increase propagation delay. Logic receivers and transceivers allow isolated communication between data buses.