DC DC Switching Controllers

Showing

of 2

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Type	Function	Output Configuration	Topology	Number of Outputs	Output Phases	Voltage - Supply (Vcc/Vdd)	Frequency - Switching	Duty Cycle (Max)	Synchronous Rectifier	Clock Sync	Serial Interfaces	Control Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT8357JMSE#PBF LOW-IQ 2MHZ 60V ISOLATED SEPIC F Analog Devices Inc.	141 In Stock	1 : ¥47.10000 Tube	-	Tube	Active	Transistor Driver	Step-Up, Step-Up/Step-Down	Positive	Boost, Flyback, SEPIC	1	1	3V ~ 60V	100kHz ~ 2MHz	95%	No	No	-	Current Limit, Enable, Frequency Control, Power Good, Soft Start	-40°C ~ 150°C (TJ)	Surface Mount	12-TSSOP (0.118", 3.00mm Width) Exposed Pad	12-MSOP-EP
LT8357HMSE#PBF LOW-IQ 2MHZ 60V ISOLATED SEPIC F Analog Devices Inc.	162 In Stock	1 : ¥49.42000 Tube	-	Tube	Active	Transistor Driver	Step-Up, Step-Up/Step-Down	Positive	Boost, Flyback, SEPIC	1	1	3V ~ 60V	100kHz ~ 2MHz	95%	No	No	-	Current Limit, Enable, Frequency Control, Power Good, Soft Start	-40°C ~ 150°C (TJ)	Surface Mount	12-TSSOP (0.118", 3.00mm Width) Exposed Pad	12-MSOP-EP

Showing

of 2

PMIC (Power Management Integrated Circuit) DC to DC switching controllers are voltage regulation ICs used in high efficiency circuits configured to generate output supply voltages above (boost or step-up) or below (buck or step-down) the input supply. Other topologies may include; buck-boost, flyback, forward, cuk, SEPIC, full bridge, half bridge, and push-pull. They differ from linear regulators that require minimum voltages and "burn off" excess voltage.