Crystals

Results: 4

Filters

Stacked

Scrolling

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Type	Frequency	Frequency Stability	Frequency Tolerance	Load Capacitance	ESR (Equivalent Series Resistance)	Operating Mode	Operating Temperature	Ratings	Mounting Type	Package / Case	Size / Dimension	Height - Seated (Max)

STDCRG2-25M CRYSTAL 25.0000MHZ 8PF SMD NDK America, Inc.	85,204 In Stock	1 : ¥4.84000 Cut Tape (CT) 3,000 : ¥2.41294 Tape & Reel (TR)	NX3225GA	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	MHz Crystal	25 MHz	±30ppm	±20ppm	8pF	50 Ohms	Fundamental	-40°C ~ 85°C	-	Surface Mount	4-SMD, No Lead	0.126" L x 0.098" W (3.20mm x 2.50mm)	0.035" (0.90mm)
CM8V-T1A-32.768KHZ-7PF-20PPM-TA-QC CRYSTAL 32.7680KHZ 7PF SMD Micro Crystal AG	73,889 In Stock	1 : ¥4.93000 Cut Tape (CT) 1,000 : ¥2.64011 Tape & Reel (TR)	CM8V	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	kHz Crystal (Tuning Fork)	32.768 kHz	-	±20ppm	7pF	70 kOhms	Fundamental	-40°C ~ 85°C	-	Surface Mount	2-SMD, No Lead	0.079" L x 0.047" W (2.00mm x 1.20mm)	0.024" (0.60mm)
Q 0,032768-JTX310-12,5-20-T1-HMR-50K-LF CRYSTAL 32.7680KHZ 12.5PF SMD Jauch Quartz	57,085 In Stock	1 : ¥3.12000 Cut Tape (CT) 3,000 : ¥1.84721 Tape & Reel (TR)	JTX310	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	kHz Crystal (Tuning Fork)	32.768 kHz	-	±20ppm	12.5pF	50 kOhms	Fundamental	-40°C ~ 85°C	AEC-Q200	Surface Mount	2-SMD, No Lead	0.126" L x 0.059" W (3.20mm x 1.50mm)	0.035" (0.90mm)
CS06025-26M CRYSTAL 26.0000MHZ 8PF SMD NDK America, Inc.	11,954 In Stock	1 : ¥6.49000 Cut Tape (CT) 3,000 : ¥3.60698 Tape & Reel (TR)	NX2016SA	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	MHz Crystal	26 MHz	±20ppm	±15ppm	8pF	100 Ohms	Fundamental	-20°C ~ 70°C	-	Surface Mount	4-SMD, No Lead	0.079" L x 0.063" W (2.00mm x 1.60mm)	0.020" (0.50mm)

Showing

of 4

Crystals

Crystal products are passive components most commonly used as time or frequency references in electronic systems. Consisting of a piezoelectric crystal that mechanically vibrates at a known frequency, their use requires provision of an external oscillator circuit with carefully designed capacitance, drive voltage, and series resistance characteristics, to generate a signal at the indicated crystal frequency that operates successfully over the operating temperature range, without damaging the crystal element. Active devices which integrate this additional necessary circuitry are considered oscillators and are catalogued separately.