Common Mode Chokes

Results: 3
Manufacturer
Murata ElectronicsTDK Corporation
Series
ACMACTDLW5B
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Filter Type
Power LinePower, Signal LineSignal Line
Impedance @ Frequency
500 Ohms @ 100 MHz700 Ohms @ 100 MHz
Current Rating (Max)
150mA4A8A
DC Resistance (DCR) (Max)
6mOhm27mOhm1.5Ohm
Voltage Rating - DC
50V80V
Operating Temperature
-40°C ~ 125°C-40°C ~ 85°C
Ratings
-AEC-Q200
Features
-A2B
Size / Dimension
0.126" L x 0.098" W (3.20mm x 2.50mm)0.197" L x 0.197" W (5.00mm x 5.00mm)0.472" L x 0.433" W (12.00mm x 11.00mm)
Height (Max)
0.098" (2.50mm)0.236" (6.00mm)
Stocking Options
Environmental Options
Media
Marketplace Product
3Results
Showing
of 3
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Filter Type
Number of Lines
Impedance @ Frequency
Inductance @ Frequency
Current Rating (Max)
DC Resistance (DCR) (Max)
Voltage Rating - DC
Voltage Rating - AC
Operating Temperature
Ratings
Approval Agency
Features
Mounting Type
Size / Dimension
Height (Max)
Package / Case
ACT1210
B82786L0104N002
CMC 100UH 150MA 2LN SMD AEC-Q200
TDK Corporation
34,984
In Stock
1 : ¥15.19000
Cut Tape (CT)
6,000 : ¥7.10312
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
2
-
100 µH @ 100 kHz
150mA
1.5Ohm
80V
-
-40°C ~ 125°C
AEC-Q200
-
A2B
Surface Mount
0.126" L x 0.098" W (3.20mm x 2.50mm)
0.098" (2.50mm)
Horizontal, 4 PC Pad
16,426
In Stock
1 : ¥17.34000
Cut Tape (CT)
500 : ¥9.24660
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Power Line
2
700 Ohms @ 100 MHz
-
8A
6mOhm
80V
-
-40°C ~ 85°C
-
-
-
Surface Mount
0.472" L x 0.433" W (12.00mm x 11.00mm)
0.236" (6.00mm)
Horizontal, 4 PC Pad
DLW5B
DLW5BTM501SQ2L
CMC 4A 2LN 500 OHM SMD
Murata Electronics
0
In Stock
1 : ¥11.22000
Cut Tape (CT)
700 : ¥5.86754
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Power, Signal Line
2
500 Ohms @ 100 MHz
-
4A
27mOhm
50V
-
-40°C ~ 85°C
-
-
-
Surface Mount
0.197" L x 0.197" W (5.00mm x 5.00mm)
0.098" (2.50mm)
Horizontal, 4 PC Pad
Showing
of 3

Common Mode Chokes

A common mode choke is an electrical filter that blocks high frequency noise common to two or more data or power lines while allowing the desired DC or low-frequency signal to pass. Common mode (CM) noise current is typically radiated from sources such as unwanted radio signals, unshielded electronics, inverters and motors. Left unfiltered, this noise presents interference problems in electronics and electrical circuits.