Common Mode Chokes

Results: 2
Manufacturer
EPCOS - TDK ElectronicsTDK Corporation
Series
ACT45BB82793
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Current Rating (Max)
200mA800mA
DC Resistance (DCR) (Max)
140mOhm (Typ)1Ohm
Voltage Rating - DC
50V80V
Voltage Rating - AC
42V-
Operating Temperature
-40°C ~ 125°C-40°C ~ 150°C
Size / Dimension
0.177" L x 0.126" W (4.50mm x 3.20mm)0.280" L x 0.236" W (7.10mm x 6.00mm)
Height (Max)
0.118" (3.00mm)0.189" (4.80mm)
Package / Case
Horizontal, 4 Gull WingHorizontal, 4 PC Pad
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Filter Type
Number of Lines
Impedance @ Frequency
Inductance @ Frequency
Current Rating (Max)
DC Resistance (DCR) (Max)
Voltage Rating - DC
Voltage Rating - AC
Operating Temperature
Ratings
Approval Agency
Features
Mounting Type
Size / Dimension
Height (Max)
Package / Case
B82793C0,S0
B82793S0513N201
CMC 51UH 800MA 2LN SMD AEC-Q200
EPCOS - TDK Electronics
7,545
In Stock
1 : ¥15.39000
Cut Tape (CT)
1,500 : ¥6.86762
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
2
-
51 µH @ 100 kHz
800mA
140mOhm (Typ)
80V
42V
-40°C ~ 125°C
AEC-Q200
-
-
Surface Mount
0.280" L x 0.236" W (7.10mm x 6.00mm)
0.189" (4.80mm)
Horizontal, 4 Gull Wing
ACT45B
ACT45B-510-2P-TL003
CMC 51UH 200MA 2LN 2.8KOHM SMD
TDK Corporation
70,792
In Stock
1 : ¥15.73000
Cut Tape (CT)
2,500 : ¥7.61794
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
2
2.8 kOhms @ 10 MHz
51 µH @ 100 kHz
200mA
1Ohm
50V
-
-40°C ~ 150°C
AEC-Q200
-
-
Surface Mount
0.177" L x 0.126" W (4.50mm x 3.20mm)
0.118" (3.00mm)
Horizontal, 4 PC Pad
Showing
of 2

Common Mode Chokes

A common mode choke is an electrical filter that blocks high frequency noise common to two or more data or power lines while allowing the desired DC or low-frequency signal to pass. Common mode (CM) noise current is typically radiated from sources such as unwanted radio signals, unshielded electronics, inverters and motors. Left unfiltered, this noise presents interference problems in electronics and electrical circuits.