Common Mode Chokes

Results: 2
Manufacturer
TDK CorporationWürth Elektronik
Series
ACT45BWE-CNSW
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Impedance @ Frequency
2.2 kOhms @ 100 MHz5.8 kOhms @ 10 MHz
Current Rating (Max)
150mA200mA
DC Resistance (DCR) (Max)
1.2Ohm2Ohm
Operating Temperature
-40°C ~ 125°C-40°C ~ 150°C
Size / Dimension
0.126" L x 0.063" W (3.20mm x 1.60mm)0.177" L x 0.126" W (4.50mm x 3.20mm)
Height (Max)
0.083" (2.10mm)0.118" (3.00mm)
Stocking Options
Environmental Options
Media
Marketplace Product
2Results

Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Filter Type
Number of Lines
Impedance @ Frequency
Inductance @ Frequency
Current Rating (Max)
DC Resistance (DCR) (Max)
Voltage Rating - DC
Voltage Rating - AC
Operating Temperature
Approval Agency
Features
Grade
Qualification
Mounting Type
Size / Dimension
Height (Max)
Package / Case
Horizontal, 4 PC Pad
744232222
CMC 200MA 2LN 2.2KOHM SMD
Würth Elektronik
11,023
In Stock
1 : ¥11.14000
Cut Tape (CT)
2,000 : ¥3.69293
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
2
2.2 kOhms @ 100 MHz
-
200mA
1.2Ohm
50V
-
-40°C ~ 125°C
-
-
-
-
Surface Mount
0.126" L x 0.063" W (3.20mm x 1.60mm)
0.083" (2.10mm)
Horizontal, 4 PC Pad
ACT45B
ACT45B-101-2P-TL003
CMC 100UH 150MA 2LN 5.8KOHM SMD
TDK Corporation
23,199
In Stock
1 : ¥15.73000
Cut Tape (CT)
2,500 : ¥7.61794
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
2
5.8 kOhms @ 10 MHz
100 µH @ 100 kHz
150mA
2Ohm
50V
-
-40°C ~ 150°C
-
-
Automotive
AEC-Q200
Surface Mount
0.177" L x 0.126" W (4.50mm x 3.20mm)
0.118" (3.00mm)
Horizontal, 4 PC Pad
Showing
of 2

Common Mode Chokes


A common mode choke is an electrical filter that blocks high frequency noise common to two or more data or power lines while allowing the desired DC or low-frequency signal to pass. Common mode (CM) noise current is typically radiated from sources such as unwanted radio signals, unshielded electronics, inverters and motors. Left unfiltered, this noise presents interference problems in electronics and electrical circuits.