Common Mode Chokes

Results: 2

Filters

Stacked

Scrolling

Showing

of 2

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Filter Type	Number of Lines	Inductance @ Frequency	Current Rating (Max)	DC Resistance (DCR) (Max)	Voltage Rating - DC	Voltage Rating - AC	Operating Temperature	Ratings	Approval Agency	Features	Mounting Type	Size / Dimension	Height (Max)	Package / Case

B82786L0204N002 CMC 200UH 70MA 2LN SMD AEC-Q200 TDK Corporation	70,491 In Stock	1 : ¥15.73000 Cut Tape (CT) 6,000 : ¥7.35525 Tape & Reel (TR)	ACT	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Signal Line	2	200 µH @ 100 kHz	70mA	5.5Ohm	80V	-	-40°C ~ 125°C	AEC-Q200	-	-	Surface Mount	0.126" L x 0.098" W (3.20mm x 2.50mm)	0.098" (2.50mm)	Horizontal, 4 PC Pad
SN8S-300JA CMC 26UH 2A 2LN TH KEMET	99 In Stock	1 : ¥21.18000 Bulk	SN	Bulk	Active	Power Line	2	26 µH @ 100 kHz	2A	42mOhm	-	-	-25°C ~ 105°C	-	-	-	Through Hole	0.709" L x 0.472" W (18.00mm x 12.00mm)	0.709" (18.00mm)	Vertical, 2 PC Pin

Showing

of 2

Common Mode Chokes

A common mode choke is an electrical filter that blocks high frequency noise common to two or more data or power lines while allowing the desired DC or low-frequency signal to pass. Common mode (CM) noise current is typically radiated from sources such as unwanted radio signals, unshielded electronics, inverters and motors. Left unfiltered, this noise presents interference problems in electronics and electrical circuits.