Common Mode Chokes

Results: 2
Manufacturer
EPCOS - TDK ElectronicsTDK Corporation
Series
ACT1210B82793
Packaging
Cut Tape (CT)Digi-Reel®Tape & Reel (TR)
Inductance @ Frequency
51 µH @ 100 kHz130 µH @ 100 kHz
Current Rating (Max)
115mA800mA
DC Resistance (DCR) (Max)
140mOhm (Typ)3.5Ohm
Voltage Rating - AC
42V-
Size / Dimension
0.154" L x 0.098" W (3.90mm x 2.50mm)0.280" L x 0.236" W (7.10mm x 6.00mm)
Height (Max)
0.098" (2.50mm)0.189" (4.80mm)
Package / Case
Horizontal, 4 Gull WingHorizontal, 4 PC Pad
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Filter Type
Number of Lines
Impedance @ Frequency
Inductance @ Frequency
Current Rating (Max)
DC Resistance (DCR) (Max)
Voltage Rating - DC
Voltage Rating - AC
Operating Temperature
Ratings
Approval Agency
Features
Mounting Type
Size / Dimension
Height (Max)
Package / Case
ACT1210D-131-2P-TL00
ACT1210D-131-2P-TL00
CMC 130UH 115MA 2LN 6.7KOHM SMD
TDK Corporation
3,273
In Stock
1 : ¥14.45000
Cut Tape (CT)
6,000 : ¥6.74232
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
2
6.7 kOhms @ 10 MHz
130 µH @ 100 kHz
115mA
3.5Ohm
80V
-
-40°C ~ 125°C
AEC-Q200
-
-
Surface Mount
0.154" L x 0.098" W (3.90mm x 2.50mm)
0.098" (2.50mm)
Horizontal, 4 PC Pad
B82793C0,S0
B82793S0513N201
CMC 51UH 800MA 2LN SMD AEC-Q200
EPCOS - TDK Electronics
7,570
In Stock
1 : ¥15.39000
Cut Tape (CT)
1,500 : ¥6.86762
Tape & Reel (TR)
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Signal Line
2
-
51 µH @ 100 kHz
800mA
140mOhm (Typ)
80V
42V
-40°C ~ 125°C
AEC-Q200
-
-
Surface Mount
0.280" L x 0.236" W (7.10mm x 6.00mm)
0.189" (4.80mm)
Horizontal, 4 Gull Wing
Showing
of 2

Common Mode Chokes

A common mode choke is an electrical filter that blocks high frequency noise common to two or more data or power lines while allowing the desired DC or low-frequency signal to pass. Common mode (CM) noise current is typically radiated from sources such as unwanted radio signals, unshielded electronics, inverters and motors. Left unfiltered, this noise presents interference problems in electronics and electrical circuits.