Cable and Cord Grips

Results: 2

Filters

Stacked

Scrolling

Showing

of 2

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Type	Outside Cable Diameter (Min)	Outside Cable Diameter (Max)	Thread Size	Thread Length	Conduit Hub Size	Panel Hole Size	Material	Includes	Color	Ingress Protection	Operating Temperature

A1545.N0500.12 CABLE GLAND 5.5-12MM 1/2" NPT American Electrical Inc.	4,499 In Stock 2,000 Factory	1 : ¥22.78000 Bag	Syntec®	Bag	Active	Cable Gland	0.217" (5.50mm)	0.472" (12.00mm)	1/2" NPT	0.591" (15.00mm)	-	-	Polyamide (PA), Nylon	Sealing Ring	Black	IP54/IP68 - Dust Protected, Dust Tight, Waterproof, Water Resistant	-30°C ~ 100°C
1411133 CABLE GLAND 6-12MM M20 POLYAMIDE Phoenix Contact	1,995 In Stock	1 : ¥6.98000 Bulk	-	Bulk	Active	Cable Gland	0.236" (6.00mm)	0.472" (12.00mm)	M20	0.394" (10.00mm)	-	-	Polyamide (PA), Nylon	Seal	Black	IP66/IP68 - Dust Tight, Water Resistant, Waterproof	-40°C ~ 100°C

Showing

of 2

Cable and Cord Grips

Cable and cord grip products, sometimes also called cable feedthroughs, cable glands, or cable seals, are a family of products used to mechanically secure a cable or wire as it passes through an enclosure wall or exits a sealed conduit, guarding against abrasion at the exit point and damage to the internal portion from excess tension applied to the outer portion. Many such products also provide a high degree of environmental protection, allowing an enclosure to remain sealed against ingress of moisture even though a cable or wire is passed through its outer wall.