Buffers, Drivers, Receivers, Transceivers

Results: 4

Filters

Stacked

Scrolling

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Logic Type	Number of Elements	Number of Bits per Element	Input Type	Output Type	Current - Output High, Low	Voltage - Supply	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

SN74LVC2G17DBVR IC BUF NON-INVERT 5.5V SOT23-6 Texas Instruments	51,043 In Stock	1 : ¥3.40000 Cut Tape (CT) 3,000 : ¥0.62730 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	2	1	Schmitt Trigger	Push-Pull	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	-	-	Surface Mount	SOT-23-6	SOT-23-6
SN74LVC1G17QDBVRQ1 IC BUF NON-INVERT 5.5V SOT23-5 Texas Instruments	20,269 In Stock	1 : ¥3.37000 Cut Tape (CT) 3,000 : ¥0.95770 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Buffer, Non-Inverting	1	1	Schmitt Trigger	Push-Pull	32mA, 32mA	1.65V ~ 5.5V	-40°C ~ 125°C (TA)	Automotive	AEC-Q100	Surface Mount	SC-74A, SOT-753	SOT-23-5
SN74LVC16245ADGGR IC TXRX NON-INVERT 3.6V 48TSSOP Texas Instruments	6,935 In Stock	1 : ¥12.07000 Cut Tape (CT) 2,000 : ¥5.30115 Tape & Reel (TR)	74LVC	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Transceiver, Non-Inverting	2	8	-	3-State	24mA, 24mA	1.65V ~ 3.6V	-40°C ~ 125°C (TA)	-	-	Surface Mount	48-TFSOP (0.240", 6.10mm Width)	48-TSSOP
SN74AUP3G07DCUR IC BUFFER NON-INVERT 3.6V 8VSSOP Texas Instruments	401 In Stock 76,301 Marketplace	1 : ¥4.34000 Cut Tape (CT) 3,000 : ¥1.54379 Tape & Reel (TR)	74AUP	Tape & Reel (TR) Cut Tape (CT) Digi-Reel® Bulk	Active	Buffer, Non-Inverting	3	1	-	Open Drain	-, 4mA	0.8V ~ 3.6V	-40°C ~ 85°C (TA)	-	-	Surface Mount	8-VFSOP (0.091", 2.30mm Width)	8-VSSOP

Showing

of 4

Buffers, Drivers, Receivers, Transceivers

Logic buffers, drivers, receivers and transceivers allow isolated access to logic signals from one circuit for use in another circuit. Buffers pass their input signal, either unchanged or inverted, to their output and may be used to clean up a weak signal or drive a load. In a boolean logic simulator, a buffer is mainly used to increase propagation delay. Logic receivers and transceivers allow isolated communication between data buses.