Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Grade	Qualification	Mounting Type	Package / Case	Supplier Device Package

NCV1117ST33T3G IC REG LINEAR 3.3V 1A SOT223 onsemi	34,906 In Stock	1 : ¥5.53000 Cut Tape (CT) 4,000 : ¥1.99373 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	20V	3.3V	-	1.2V @ 800mA	1A	10 mA	-	64dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C (TA)	Automotive	AEC-Q100	Surface Mount	TO-261-4, TO-261AA	SOT-223
NCP705MT33TCG IC REG LINEAR 3.3V 500MA 6WDFN onsemi	13,795 In Stock	1 : ¥7.72000 Cut Tape (CT) 3,000 : ¥2.78622 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	5.5V	3.3V	-	-	500mA	25 µA	-	-	Enable	Over Current, Over Temperature, Soft Start, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	-	-	Surface Mount	6-WDFN Exposed Pad	6-WDFN (2x2)
XC6206P332MR-G IC REG LINEAR 3.3V 200MA SOT23 Torex Semiconductor Ltd	961 In Stock	1 : ¥5.27000 Cut Tape (CT) 3,000 : ¥2.02935 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	6V	3.3V	-	0.68V @ 100mA	200mA	3 µA	3 µA	-	-	Over Current, Short Circuit	-40°C ~ 85°C (TA)	-	-	Surface Mount	TO-236-3, SC-59, SOT-23-3	SOT-23

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.