探索用于高级传感器测量和测试的 National Instruments CompactDAQ 系统。这些模块具有可靠性和多功能性，是数据记录、验证和控制等各种应用的理想选择。

Attend this webinar to learn how you can use CompactDAQ to build a custom measurement system that adapts to your needs, now and in the future.

使用软件包，工程师能够构建测试程序，以控制测试硬件、获取数据、查看、分析和报告测试结果。

使用 NI CompactDAQ 系列坚固型、模块化、便携式数据采集设备，开发人员可以直接将数据传输到 PC，立即实现可视化。

This application note explores the basics of this increasingly important category of semiconductor technologies and devices and features NI hardware and software solutions that help MEMS manufacturers test and measure these devices efficiently and confidently.

This application note is focused on battery module and pack level testing using examples of real-world industry applications.

This application note focuses specifically on test considerations around high-power PAs and how the steps taken in validation of these devices can be different from PAs that operate at lower power levels.

100kW Mobile-Friendly and Scalable Battery Cycler Solution.

This application note is created with the assumption that the reader is familiar with WLAN PHY-layer testing and is based on the use of a vector signal transceiver (VST) for stimulation and measurement of an RF front-end device.

From pre-silicon simulation and verification to validation bench instruments and production automated test, each piece of equipment is designed for a specific purpose.

NI has served the aerospace and defense industry for more than 40 years, and we remain committed to supporting your pursuits.

The 4800 delivers up to 80VDC and 400A in a single unit while delivering scalable power ranging from 16.5kW up to 165kW.

This white paper focuses on these new “Beyond 5G” developments, the continued enhancement of existing 5G technologies, and the implications for RF engineers who need to test and validate the next generation of wireless components, subsystems, and devices.

LabVIEW is a graphical programming environment engineers use to develop automated research, validation, and production test systems. It’s designed for engineers, and has what you need to go fast.

NI 的 CompactDAQ 模拟输入模块可测量温度、声音、应变、压力、负载、振动等。

NI 的 C 系列应变/电桥测量模块提供四分之一桥、半桥和全桥传感器选项。

NI 的 C 系列声音和振动模块专为 IEPE 声音和振动传感器连接和数据收集而设计。

NI 的 CompactDAQ C 系列温度输入模块可测量来自热电偶和电阻温度检测器 (RTD) 等温度传感器的信号。

NI 的 CompactDAQ 电流输入测量模块适用于高性能控制和监测应用。

通过使用现成的 PXI I/O 套件代替独立的测试设备，可以为设计人员提供紧凑、可扩展、经济高效的测试功能。