Watch how ISOLOSS™ LS Foams’ low compression set performs verse other foams. At room temperature, ISOLOSS™ LS Foam rebounds within 1% of its original thickness to help maintain the same fit, form, and function throughout the product’s lifecycle.

In part 1 of this 3 part series, Application Engineer Chirag Patel describes a few of the key elements used in the design of vibration isolation solutions.

Concluding the 3 part series, E-A-R™ Senior Applications Engineer explains transmissibility and demonstrates the effects of utilizing highly damped fan mounts to isolate a fan from a PC system.

In part 1 of this 3 part series, Application Engineer Chirag Patel describes a few of the key elements used in the design of vibration isolation solutions.

When put to the test against a leading brand competitive foam, both CONFOR™ EG and SC demonstrate much better impact performance, despite the competitor's claims. All tested foam was 1mm thick + 2 mil PET on one side.

Chirag Patel, Electronics Application Engineer with Aearo Technologies, explains the importance of decoupling vibrations from the system in order to decrease the transmission of noise and vibrations throughout.

A look at how Aearo Technologies, manufacturer of E-A-R™ noise, shock, and vibration control materials, partners with customers to help them win with successful products.

Video demonstrates E-A-R ISODAMP material damping properties versus EPDM material.