Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Product List
CCG30S-Slide4

The output can be adjusted for non-standard voltages via the trim pin over a ±10% range from the factory nominal set point. The converters can be enabled (turned ON) by pulling the remote on/off pin low, referenced to a negative input. All units are potted for improved shock and vibration performance making them ideal for portable equipment. The six sided shielded enclosure reduces radiated EMI.

PTM Published on: 2015-07-27