Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Slide 10 Slide 11 Slide 12 Product List
Ha-VIS preLink - Ethernet Cabling System Slide 3
The same three simple steps are required for each installation and are as follows: Step 1: The cable jacket is stripped back and the exposed shield is dressed back over the jacket. Then the individual wires are inserted into the Ha-VIS preLink® termination block according to their color codes.
PTM Published on: 2015-07-27