Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Slide 10 Slide 11 Slide 12 Slide 13 Slide 14 Slide 15 Slide 16 Product List
How to Perform a Range Test Slide 6

Look closely on the interface board, one will notice a jumper labeled ‘loop back’. In the image shown here, the engineer has shortened the jumper for use in doing a transparent mode loop back test. If the customer uses this jumper, be sure to un-jumper it once one starts using the module normally. Otherwise, the XBee’s will seem to connect, but they will not be functioning properly.

PTM Published on: 2015-03-25