Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Slide 10 Slide 11 Product List
high-power-chassis-slide7

The VHK and VFK series provide regulated outputs at the output terminals. When there is a large current and/or the output cable is of some length, the voltage at the end of the output cable may be noticeably lower than at the terminals. The converter can compensate up to 0.5V of voltage drop through remote sense terminals. To ensure accurate regulation, users should run two separate wires (twisted) from the desired regulation points to the remote sense terminals. Even if the load current is low, users should still connect +Vo to +S and -Vo to -S.

PTM Published on: 2012-05-11