NXP Semiconductors

BGU7005 Low-Noise Amplifier MMIC

NXP’s BGU7005 LNA for GPS in handsets, PDAs, and portable navigation devices

BGU7005 Low-Noise Amplifier MMICNXP Semiconductors' BGU7005 is manufactured in NXP’s breakthrough QUBiC4X SiGe:C process technology and is available in one of the industry’s smallest packages. This highly integrated GPS LNA reduces cost while delivering better sensitivity, greater immunity against jamming signals, and higher linearity. The device requires only one external matching inductor and one external decoupling capacitor.

The BGU7005 adapts itself to the changing environment that results from co-habitation of different radio systems in modern cellular handsets. It has been designed for low power consumption and optimal performance when jamming signals from co-existing cellular transmitters are present. At low jamming power levels, it delivers 16.5 dB gain at a noise figure of 0.9 dB. During high jamming power levels, which can result, for example, from a cellular transmit burst, it temporarily increases its bias current to improve sensitivity.

Features
  • Requires only one input matching inductor and one supply decoupling capacitor
  • Gain 16.5 dB at 1.575 GHz
  • Power-down mode current consumption <1 µA
  • Small 6-pin SOT886 leadless package (1.45 mm x 1.0 mm x 0.5 mm)
Applications
  • Low current consumption (5 mA)
  • Low noise figure (NF): 0.9 dB at 1.575 GHz
  • ESD protection on all pins (HBM > 1 kV)
  • Supply voltage 1.5 V to 2.85 V, optimized for 1.8 V
  • Proven, robust QUBiC4X SiGe:C process technology (fT = 110 GHz)

Low Noise Amplifier MMIC

图片制造商零件编号描述可供货数量价格
IC AMP GPS 850MHZ/1.9GHZ 6XSONBGU7005,115IC AMP GPS 850MHZ/1.9GHZ 6XSON46350 - 立即发货$5.54查看详情
发布日期： 2010-02-01

Related Product Highlight

BGU Series GPS LNAs By dynamically suppressing strong cellular and WLAN transmit signals, an industry first; NXP Semiconductors' LNAs offer the best reception of weak GPS signals.

Related Articles and Blogs

Wireless MIMO Driving RF Challenges Wireless solutions are becoming the primary networking interface for mobile devices, and are now migrating to stationary devices in both consumer and industrial applications.
Low-Noise Amplifiers Maximize Receiver Sensitivity In every RF receiver system, low-noise amplifiers (LNAs) can be used to improve the signal-to-noise ratio by replacing amplifiers with higher internal noise levels.
New RFID Tag Features Expand Application Possibilities RFID technology has been around for more than a decade, and its adoption and use continues to grow.

Related Product Training Modules

Low Noise Amplifiers for Portable Devices NXP's GNSS low noise amplifiers offer the best reception of weak signals, which can save up to 50% in PCB size and 10% in component costs.