Refine Search
Filter Options Stacked Scrolling
Eval Board
Topology
Outputs and Type
Voltage Out: Factory Set
Current Out
Voltage In
Efficiency @ Conditions
Voltage Out Range
Features
Switching Frequency
Standby Current [Typical]
Quiescent Current [Typical]
Component Count + Extras
Internal Switch
Design Author
Application / Target Market
More Filters

Designs (614)

614 Results - Page 1/62 |< < 1 2 3 4 5
Schematic View Design
AC/DC and DC/DC Conversion > DC/DC SMPS - Single Output DC1198A-A: 12V @ 5A, 4.5 ~ 20V in Manufacturer: Analog Devices Inc.

Demonstration circuit DC1198A-A features the LTM®4605EV, the high efficiency, high density switch mode buck-boost μModule® regulator. The LTM4605EV can regulate its output voltage from an input voltage above, below, or equal to the output. The input voltage range of DC1198A-A is from 4.5V to 20V with a preset output voltage of 12V. The rated load current is 5A, although derating is necessary for …

Schematic View Design
AC/DC and DC/DC Conversion > DC/DC SMPS - Single Output DC1194A: 3.3V @ 200mA, 4.5 ~ 36V in, Inductor On-Chip Manufacturer: Analog Devices Inc.

Demonstration circuit DC1194A features the LTM®8020, a 200mA DC/DC step-down μModule® regulator. The board is preset to deliver a 3.3V output at up to 200mA load current from an input voltage of up to 36V. The output voltage may be modified by simply changing one resistor.

Schematic View Design
AC/DC and DC/DC Conversion > DC/DC SMPS - Single Output DC1041A-B: 4.5V~28Vin, 12A Step Down Regulator Manufacturer: Analog Devices Inc.

Demonstration circuit DC1041A-A features the LTM®4601EV, a 12A high efficiency, high density switch mode step-down converter. The input voltage range is from 4.5V to 28V. The output voltage is jumper selectable for popular voltages from 0.6V to 5V. The PLLIN pin supports synchronizing the μModule® regulator to an external clock.

Schematic View Design
AC/DC and DC/DC Conversion > DC/DC SMPS - Single Output DC1084A-B: 0.6 ~ 5V @ 6A, 5 ~ 28V in Manufacturer: Analog Devices Inc.

Demonstration circuit DC1084A-B features the LTM®4602HV, the high efficiency, high density step-down μModule® regulator. The input voltage range is from 4.5V to 28V. The output voltage is jumper programmable from 0.6V to 5V, refer to the step-down ratio curve in the LTM4602HV data sheet.

Schematic View Design
AC/DC and DC/DC Conversion > DC/DC SMPS - Single Output MAX13256EVKIT#: 36V H-Bridge Transformer Driver Manufacturer: Analog Devices Inc./Maxim Integrated

The MAX13256 evaluation kit (EV kit) is a fully assembled and tested PCB that contains the MAX13256 10W isolated H-bridge DC-DC converter. The EV kit operates from an 8V to 36V DC power source and the on-board 1:1 turns-ratio transformer from HALO sets the output voltage range from 6.8V to 34.8V with a 300mA current limit.

Schematic View Design
AC/DC and DC/DC Conversion > DC/DC SMPS - Single Output LMZ23610EVAL: 1.2/ 2.5/ 3.3/ 5V @ 10A, 6 ~ 36V in Manufacturer: Texas Instruments

The LMZ23610/8/6 and LMZ22010/8/6 SIMPLE SWITCHER® power modules are easy-to-use DC-DC solution capable of driving up to a 10, 8 or 6 ampere load. They are available in an innovative package that enhances thermal performance and allows for hand or machine soldering. The LMZ23610/8/6 can accept an input voltage rail between 6V and 36V and the LMZ22010/8/6 can accept an input voltage rail between 6…

Schematic View Design
AC/DC and DC/DC Conversion > DC/DC SMPS - Single Output LM5006EVAL: 5V @ 500mA, 6 ~ 75V in Manufacturer: Texas Instruments

The LM5006EVAL evaluation board provides the design engineer with a fully functional buck regulator, employing the constant on-time (COT) operating principle. This evaluation board provides a 5V output over an input range of 6V to 75V. The circuit delivers load currents to 500 mA, with current limit set at a nominal 1 Amp.

Schematic View Design
AC/DC and DC/DC Conversion > DC/DC SMPS - Single Output LMZ22003EVAL: 3.3V @ 3A, 6 ~ 20V in Manufacturer: Texas Instruments

The LMZ23605/03, LMZ22005/03 evaluation boards are designed to be an easy-to-use platform to evaluate the full capabilities of this family of SIMPLE SWITCHER® power modules. The PCB construction has excellent thermal performance and includes extra locations for optional components that may not be required in the end application.

Schematic View Design
AC/DC and DC/DC Conversion > DC/DC SMPS - Single Output LMZ23605EVAL: 3.3V @ 5A, 6 ~ 36V in Manufacturer: Texas Instruments

The LMZ23605/03, LMZ22005/03 evaluation boards are designed to be an easy-to-use platform to evaluate the full capabilities of this family of SIMPLE SWITCHER® power modules. The PCB construction has excellent thermal performance and includes extra locations for optional components that may not be required in the end application.

Schematic View Design
AC/DC and DC/DC Conversion > DC/DC SMPS - Single Output LM21212-1EVM: 1.2V @ 12A, 2.95 ~ 5.5V in Manufacturer: Texas Instruments

This evaluation board provides a solution to examine the high efficiency LM21212-1 buck switching regulator. The LM21212-1 is capable of driving up to 12A of continuous load current with excellent output voltage accuracy due to its ±1% internal reference.

614 Results - Page 1/62 |< < 1 2 3 4 5