Maker.io main logo

Jayy-O-Lantern

2021-10-29 | By Jorvon Moss

License: See Original Project

Step 1:

Trace a line pattern onto the pumpkin, just a small, almost oval shape you can fit your head through. I recommend using a hot knife to cut the pumpkin, but if not, a box cutter may work.

step_1

Step 2:

Make sure the pumpkin fits on your head comfortably before continuing on.

step_2

Step 3:

Cut eye holes into the pumpkin. I recommend measuring out your face to find the comfiest place for the eyes.

step_3

Step 4:

I airbrushed the inside of the pumpkin head black to blend my face in it better.

step_4

Step 5:

Print the lenses linked at the bottom of the tutorial to use for the eyes. I printed two and controlled them with a servo.

step_5

Step 6:

Add the circuit linked below to the pumpkin head. I taped the LED strip where the mouth would be.

step_6

Step 7:

Wear it and enjoy.

step_7

Video:

 

Supplies:

  1. Pumpkin
  2. Adafruit Trinket
  3. Electret Microphone Amplifier
  4. Adafruit NeoPixel Digital RGB LED Strip
  5. PowerBoost 1000 Basic
  6. Lithium-Ion Polymer Battery

Links:

  1. Iris
  2. Sound Circuit
制造商零件编号 1500
TRINKET 3V ATTINY85 EVAL BRD
Adafruit Industries LLC
¥56.57
Details
制造商零件编号 1063
AMP MICROPHONE ADJUSTABLE
Adafruit Industries LLC
¥56.57
Details
制造商零件编号 2508
ADDRESS LED STRIP SERIAL RGB 1M
Adafruit Industries LLC
¥210.22
Details
制造商零件编号 2030
5V USB BOOST 1000MA FROM 1.8V
Adafruit Industries LLC
¥121.69
Details
Add all DigiKey Parts to Cart
TechForum

Have questions or comments? Continue the conversation on TechForum, DigiKey's online community and technical resource.

Visit TechForum