Analog for Xilinx® FPGAs

Texas Instruments is the approved and tested vendor for the analog solution around the Xilinx® FPGAs and CPLDs. TI works closely with Xilinx® to recommend the best power management, clocking, data converter, and other analog solutions for a wide variety of applications.

Clocking Solutions

Clock Required Virtex®-7
VC707		 Kintex®-7
KC705		 Artix®-7
AC701		 Zynq®-7000
ZC702		 Frequency
(MHz)		 Output Type Features Recommended TI
Clocking Devices 
System Clock x x x x 200 LVDS Fixed frequency CDCM6208
SGMII GTX Clock x x x   125 LVDS Fixed frequency
PS Clock       x 33.3333 CMOS Fixed frequency
User Clock x x x x 156.25 LVDS User-configurable via I2C: 10 to 810 MHz 
Jitter-Attenuated Clock x x x   Up to 2600 LVDS CPRI/OBSAI reference  LMK04906

 

Access TI’s additional Analog product portfolios to help streamline your Xilinx® FPGA design.

Repeaters, Retimers and Mux-Buffers

Family Repeaters Retimers Advanced Retimers MUX-Buffers
New Products
Insertion Loss EQ, DE EQ, DE EQ, DE EQ, DE
Jitter   CDR CDR  
Crosstalk     DFE  
Applications
  • Active Cables
  • Backplanes
  • Front Port
  • Optical
  • Front Port
  • Backplanes
  • Redundancy Switch

Comprehensive Portfolio, Easy Upgrade Path

Family PCIe USB SAS SATA 100-KR 10GbE FC InfiniBand Generic, Other
Mux-Buffers/Crosspoints PCIe Gen-1/2/3
  • 2:1 Mux-Buffers
PCIe Gen-1
  • FET Switch
 SAS I/II
  • 2:1 Mux-Buffers
  • 2/4 Lanes
SATA 1.5/3/6G
  • 2:1 Mux-Buffers
  • 2/4 Lanes
 10G-KR
  • 2:1 Mux-Buffers
  • 2/4 Lanes
10 GbE
  • 2:1 Mux-Buffers
  • 2/4 Lanes
 2/4/8/16G FC
  • 2:1 Mux-Buffers
  • 2/4 Lanes
DDR/QDR/FDR IB
  • 2:1 Mux-Buffers
  • 2/4 Lanes
 < 15 Gbps
  • 4 Lanes
< 10 Gbps
  • 2/4 Lanes
Retimers     10 GbE
  • 4 Channels
 2/4/8/16G FC
  • 4 Channels
DDR/QDR/FDR IB
  • 4 Channels
 < 12.5 Gbps
  • 4 Channels
< 10 Gbps
  • 4 Channels
Repeaters/Redrivers PCIe Gen-1/2/3
  • x1/x4/x8/x16
USB 2.0/3.0
  • 2 Channels
 SAS I/II
  • 1/2/4/8 Channels
SATA 1.5/3/6G
  • 1/2/4/8 Channels
 10G-KR
  • 2/4/8 Channels
10 GbE
  • 2/4/8 Channels
 2/4/8/16G FC
  • 2/4/8 Channels
DDR/QDR/FDR IB
  • 2/4/8 Channels
 < 15 Gbps
  • 1/2/4/8 Channels
< 10 Gbps
  • 1/2/4/8 Channels
< 5 Gbps
  • 1/2/4/8 Channels

Equalizers, Reclockers and Cable Drivers

Device Description Supply
Voltage (V)		 Typ
Power (mW)		 Data Rate
(Mbps)		 Temp
Range2		 Evaluation
Board		 Package(s)
Cable Equalizers
LMH0384SQ 3G/HD/SD extended-reach adaptive cable equalizer 3.3 230 123 to 2970 Ind SD384EVK LLP-16
LMH0044SQ HD/SD adaptive cable equalizer 3.3 208 143 to 1485 Ext SD044EVK LLP-16
LMH0034MA HD/SD adaptive cable equalizer 3.3 208 143 to 1485 Ext SD034EVK SOIC-16
LMH0074SQ SD adaptive cable equalizer with cable detect 3.3 208 143 to 540 Ind SD074EVK LLP-16
LMH0024MA 3.3-V SD adaptive cable equalizer 3.3 198 143 to 540 Ind SD024EVK SOIC-16
Reclockers
LMH0346MH/SQ 3G/HD/SD reclocker with dual differential outputs 3.3 370 270 to 2970 Ind SD3GDAEVK/
SD346EVK		 eTSSOP-20, LLP-24
LMH0346MH/SQ 3G/HD/SD reclocker with 4:1 input MUX and FR4 equalization 3.3 430 270 to 2970 Ind SD356EVK LLP-48, LLP-40
LMH0046MH HD/SD reclocker with dual differential outputs 3.3 330 143 to 1485 Ind SD046EVK eTSSOP-20
LMH0056SQ HD/SD reclocker with 4:1 input MUX and FR4 equalization 3.3 360 143 to 1485 Ind SD046EVK LLP-48
LMH0026MH SD reclocker with dual differential outputs 3.3 330 270 Ind SD046EVK eTSSOP-20
LMH0036SQ SD reclocker with 4:1 input MUX and FR4 equalization 3.3 350 270 Ind SD046EVK LLP-48
Cable Drivers
LMH0307GR/SQ 3G/HD/SD SDI dual cable driver with cable detect, input LOS, selectable slew rate and 4-mW power-down mode 3.3 275 Up to 2970 Ind SD307EVK microArray-25, LLP-16
LMH0302SQ 3G/HD/SD cable driver with enable feature 3.3 165 Up to 2970 Ind SD302EVK LLP-16
LMH0303SQ 3G/HD/SD SDI cable driver with cable detect, input LOS, selectable slew rate and 4-mW power-down mode 3.3 155 Up to 2970 Ind SD303EVK LLP-16
LMH0002MA/TMA HD/SD serial digital cable driver with selectable slew rate 3.3 149 Up to 1485 Com/Ind SD002EVK SOIC-8
LMH0002SQ HD/SD serial digital cable driver with selectable slew rate 3.3 149 Up to 1485 Ind SD002SQ-EVK LLP-16
LMH0202MT Dual SD/DS serial cable driver with dual differential input and output 3.3 298 Up to 1485 Com D202EVK/
DVB202-EVK		 TSSOP-16
LMH0001SQ SD serial digital cable driver with adjustable output amplitude 3.3 125 Up to 540 Ind SD001SQ-EVK LLP-16

SerDes Families

Family Serializer Deserializer Parallel Interface SigCon CLK Min (MHz) CLK Max (MHz) Typ Reach (m) Special Features
FPGA-Link DS32EL0421 DS32EL0124 5-bit LVDS TX De-E, RX EQ 125 312.5 20  
FPGA-Link DS32ELX0421 DS32ELX0124 5-bit LVDS TX De-E, RX EQ 125 312.5 20 Redundant output, loop-through
Channel Link 2 DS92LV2411 DS92LV2412 24-bit LVCMOS RX EQ 5 50 10 Supports embedded video control
Channel Link 2 DS92LV2421 DS92LV2422 24-bit LVCMOS RX EQ 10 75 10 Supports embedded video control

Ethernet PHYs for Altera

Device Interface Cable
Length (m)		 No. of LEDs JTAG Cable
Dignostics		 FX Suport IEEE1588
HW Support		 25-MHz
Clock Out		 Temp
Range (ºC)		 Package(s)
DP83848I MII, RMII, SNI 150 3 4       4 –40 to 85 QFP-48
DP83848Q* MII, RMII 150 1         4 –40 to 105 QFP-40
TLK110 MII, RMII 150 3 4 4     4 –40 to 85 QFP-48
DP83630 MII, RMII 150 3 4 4 4 4 4 –40 to 85 QFP-48
TLK105 MII, RMII 150 1           –40 to 85 QFP-32
TLK105L MII, RMII 150 2     4     –40 to 85 QFP-32
TLK106 MII, RMII 150 1   4       –40 to 105 QFP-32
TLK106L MII, RMII 150 2   4 4     –40 to 105 QFP-32
DP83848J MII, RMII 137 2           0 to 70 QFP-40
DP83848K MII, RMII 137 2           –40 to 85 QFP-40
DP83848M MII, RMII 137 1         4 0 to 70 QFP-40
DP83848T MII, RMII 137 1         4 –40 to 85 QFP-40
DP83848H MII, RMII 137 1         4 –40 to 125 QFP-40
DP83848C MII, RMII, SNI 137 3         4 0 to 70 QFP-48
TLK100 MII 200 3 4 4       –40 to 85 QFP-48
DP83620 MII, RMII 150 3 4 4 4   4 –40 to 85 QFP-48
DP83640 MII, RMII 150 3 4 4 4 4 4 –40 to 85 QFP-48
DP83848VYB MII, RMII, SNI 150 3 4       4 –40 to 105 QFP-48
DP83848YB MII, RMII, SNI 150 3 4       4 –40 to 125 QFP-48

Temperature Sensors

Device Channels N-Factor Correction Beta Correction Int. Power Monitor Accuracy Quiescent Current Size Interface
Remote Sensors
TMP411 1 Yes No No - - - -
TMP432 2 Yes Yes No - - - -
TMP513 3 Yes Yes Yes - - - -
Local Sensors
TMP112 - - - - ±0.5°C 10 μA 1.6 x 1.6 mm I2C
TMP103 - - - - ±0.3°C 3 μA 0.76 x 0.76 mm I2C
TMP122 - - - - ±1.5°C 75 μA 2.9 x 2.8 mm SPI

TI and Xilinx Ease the Design Process with Compatible Evaluation Tools

FMC-ADC-ADAPTER

TI’s FMC-ADC-ADAPTER enables over 70 TI High Speed ADC EVM and reference design kits to connect directly to the FMC connector on the latest Xilinx EVM and development kits

FMC-DAC-ADAPTER

TI’s FMC-DAC-ADAPTER enables over 10 TI High Speed DAC EVM and reference design kits to connect directly to the FMC connector on the latest Xilinx EVM and development kits

The following Xilinx boards have TI products attached!

Spartan®-6 FPGA SP605 Evaluation Kit

TI Spartan®-6 FPGA SP605 Evaluation Kit

The Spartan®-6 FPGA SP605 Evaluation Kit delivers all the basic components of hardware, design tools, IP, and reference designs enabling development right out of the box.

Virtex-6 FPGA ML605 Evaluation Kit

TI Virtex®-6 FPGA ML605 Evaluation Kit

The Virtex®-6 FPGA ML605 Evaluation Kit includes all the basic components of hardware, design tools, IP, and a pre-verified reference design for system designs that demand high-performance, serial connectivity and advanced memory interfacing.