The STWIN SensorTile wireless industrial node (STEVAL-STWINKT1B) is a development kit and reference design that simplifies prototyping and testing of advanced industrial IoT applications such as condition monitoring and predictive maintenance.
The kit features a core system board with a range of embedded industrial-grade sensors and an ultra-low-power microcontroller for vibration analysis of 9-DoF motion sensing data across a wide range of vibration frequencies, including very high frequency audio and ultrasound spectra, and high precision local temperature and environmental monitoring.
The development kit is complemented with a rich set of software packages and optimized firmware libraries, as well as a cloud dashboard application, all provided to help speed up design cycles for end-to-end solutions.
The kit supports Bluetooth® low energy wireless connectivity through an on-board module, and Wi-Fi connectivity through a special plugin expansion board (STEVAL-STWINWFV1).
Wired connectivity is also supported via an on-board RS485 transceiver.
The core system board also includes an STMod+ connector for compatible, low cost, small form factor daughter boards associated with the STM32 family, such as the LTE Cell pack.
Apart from the core system board, the kit is provided complete with a 480 mAh Li-Po battery, an STLINK-V3MINI debugger and a plastic box.
Features:
Multi-sensing wireless platform implementing vibration monitoring and ultrasound detection
Updated version of STEVAL-STWINKT1, now including STSAFE-A110 populated, BlueNRG-M2SA module and IMP23ABSU MEMS microphone
Built around STWIN core system board with processing, sensing, connectivity and expansion capabilities
Ultra-low-power ARM Cortex-M4 MCU at 120 MHz with FPU, 2048 kbytes Flash memory (STM32L4R9)
Micro SD Card slot for standalone data logging applications
On-board Bluetooth® low energy v5.0 wireless technology and Wi-Fi (with STEVAL-STWINWFV1 expansion board), and wired RS485 and USB OTG connectivity
Option to implement Authentication and Brand protection secure solution with STSAFE-A110
Wide range of industrial IoT sensors:
ultra-wide bandwidth (up to 6 kHz), low-noise, 3-axis digital vibration sensor (IIS3DWB)
3D accelerometer + 3D Gyro iNEMO inertial measurement unit (ISM330DHCX) with machine learning core
ultra-low-power high performance MEMS motion sensor (IIS2DH)
ultra-low-power 3-axis magnetometer (IIS2MDC)
digital absolute pressure sensor (LPS22HH)
relative humidity and temperature sensor (HTS221)
low-voltage digital local temperature sensor (STTS751)
industrial grade digital MEMS microphone (IMP34DT05)
analog MEMS microphone with frequency response up to 80 kHz (IMP23ABSU)
Modular architecture, expandable via on-board connectors:
STMOD+ and 40-pin flex general purpose expansions
12-pin male plug for connectivity expansions
12-pin female plug for sensing expansions
Other kit components:
Li-Po battery 480 mAh
STLINK-V3MINI debugger with programming cable
Plastic box
Manufacturer | STMicroelectronics |
---|---|
Category | Other Solutions |
Eval Board Part Number | 497-STEVAL-STWINKT1B-ND |
Eval Board Supplier | STMicroelectronics |
Eval Board |
Normally In Stock
|
Purpose |
BLE DataLogging Node & Predictive Maintenance
|
Features |
Accelerometer
ADC Battery Charger BLE - Bluetooth Low Energy GUI / Design Software Gyrometer Humidity Sensor I²C Interface I²S Magnetometer Microphone, Analog Microphone, Digital MicroSD Card Slot Motion Sensor Pressure Sensor RS485 SPI Temperature Sensor UART Ultrasonic Detection USART USB OTG Vibration Sensor Wi-Fi |
Design Author |
STMicroelectronics
|
Application / Target Market |
Predictive Maintenance
Vibration Monitoring |
Main I.C. Base Part |
IMP23ABSUTR
ISM330DHCX |
Date Created By Author | 2021-06 |
Date Added To Library | 2022-08 |