Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT3080IDD#PBF IC REG LINEAR POS ADJ 1.1A 8DFN Analog Devices Inc.	635 In Stock	1 : ¥51.31000 Tube	-	Tube	Active	Positive	Adjustable	1	36V	0V	36V	1.6V @ 1.1A	1.1A	500 µA	30 mA	75db ~ 20dB (120Hz ~ 1MHz)	-	Over Current, Over Temperature, Short Circuit	-40°C ~ 125°C	Surface Mount	8-WFDFN Exposed Pad	8-DFN (3x3)
MAX38904BATD+T IC REG LINEAR POS ADJ 2A 14TDFN Analog Devices Inc./Maxim Integrated	1,250 In Stock	1 : ¥24.63000 Cut Tape (CT) 2,500 : ¥12.35162 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Adjustable	1	5.5V	0.6V	5V	0.3V @ 2A	2A	1.3 mA	-	70dB ~ 40dB (1kHz ~ 1MHz)	Enable	Over Current, Over Temperature, Reverse Current, Soft Start	-40°C ~ 125°C (TJ)	Surface Mount	14-WFDFN Exposed Pad	14-TDFN (3x3)
NCP1117DT33G IC REG LINEAR 3.3V 1A DPAK onsemi	5,052 In Stock	1 : ¥5.91000 Tube	-	Tube	Obsolete	Positive	Fixed	1	20V	3.3V	-	1.2V @ 800mA	1A	10 mA	-	64dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	DPAK

Showing

of 3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.